The half that has nothing to do with sunlight
Nirmal Energies is a registered electrical contractor first. Distribution, control panels, drives, earthing, and the power-quality work that lowers an industrial bill without adding a single module.
Control panels designed, fabricated & wired here
We build the panel rather than buy it in, which means the enclosure suits the site, the gear is sized to the actual load, and every core is ferruled and labelled. When something needs attention in three years, the drawing matches what is in the box.
- Enclosures specified for the environment — indoor, outdoor, IP-rated
- Danfoss, Emotron and equivalent drives fitted to the duty
- Ferruled, labelled control wiring against an as-built drawing
- Commissioned and handed over with the parameters recorded
Four we build most often
VFD drive panels
Variable-frequency drives sized to the motor, with contactor gear, protection and control wiring in a ventilated enclosure. Soft starting, speed control, and a motor that stops shearing its coupling on every start.
APFC panels
Automatic power-factor correction banks with staged capacitors and a relay switching them against the real load — the fastest way to stop paying a penalty on your demand bill.
Star-delta starters
Conventional reduced-voltage starting for fixed-speed motors where a drive is not warranted. Built with proper overload protection and timed transition.
PID pressure automation
Closed-loop pressure control for pumping and process lines — transmitter, controller and drive tuned together so the line holds pressure without hunting.
Electrification, internal & external
Complete electrification for commercial buildings, residential complexes and manufacturing units — conduiting, wiring, distribution boards, fittings and final testing under one contract and one licence.
Distribution & earthing
Cable laying, transformer setup, HT and LT panel installation and sub-station work — plus the safety earthing and lightning-arrestor networks that decide whether any of it survives a monsoon strike.
- HT and LT panel installation and sub-station work
- Transformer setup and cable laying
- Earthing systems and lightning-arrestor networks
Fix the losses before you buy more generation
A factory running at a poor power factor, drawing harmonics from its drives and carrying an unbalanced load is paying for electricity it never uses. Correcting that is cheaper than generating more.
We measure power quality at the incomer and at the significant loads, identify where the losses sit, and quote the correction — capacitor banks, harmonic filters, or rebalancing — against what it saves.
Tell us what you need
powered.
New plant, an extension, a panel that keeps tripping, or a bill that has stopped making sense — start with a visit.